2019年美国2000亿加征税HS编码列表
- 编码为美国编码| 44092250 |
Other nonconiferous tropical wood moldings, whether or not continuously shaped along its edges or faces but not its ends
其他非针叶热带木材模制品，无论是否沿其边缘或面而不是其端部连续成形 |
| 44092260 |
Plain nonconiferous tropical wood dowel rods, whether or not continuously shaped along its edges or faces but not its ends
普通的非针叶热带木质木钉，无论是否沿其边缘或面而不是其末端连续成形 |
| 44092265 |
Nonconif. tropical wood dowel rods, sanded/grooved/otherwise advanced in condition, whether or not continuous. along edges or faces but not ends
Nonconif。热带木质木钉，砂纸/凹槽/其他条件先进，无论是否连续。沿着边缘或面，但不是结束 |
| 44092290 |
Other nonconiferous tropical wood, whether or not continuously shaped along its edges or faces but not its ends
其他非针叶热带木材，无论是否沿其边缘或面而不是其末端连续成形 |
| 44092906 |
Other nonconiferous wood, continuously shaped along any ends, whether or not also continuously shaped along any edges or faces
其他非针叶木，沿任何一端连续成形，无论是否沿任何边缘或面连续成形 |
| 44092911 |
Other nonconiferous wood siding, whether or not continuously shaped along its edges or faces but not its ends
其他非针叶木质壁板，无论是否沿其边缘或面而不是其末端连续成形 |
| 44092926 |
Other nonconiferous wood flooring, whether or not continuously shaped along its edges or faces but not its ends
其他非针叶木地板，无论是否沿其边缘或面而不是其末端连续成形 |
| 44092941 |
Other nonconiferous standard wood moldings, whether or not continuously shaped along its edges or faces but not its ends
其他非标准的标准木质模制品，无论是否沿其边缘或面而不是其端部连续成形 |
| 44092951 |
Other nonconiferous wood moldings, whether or not continuously shaped along its edges or faces but not its ends
其他非针叶木制模制品，无论是否沿其边缘或面而不是其端部连续成形 |
| 44092961 |
Plain other nonconif. wood dowel rods, whether or not continuously shaped along edges or faces but not ends
简单的其他非针叶树材。木质销钉，无论是否沿着边缘或面而不是端部连续成形 |
| 44092966 |
Other nonconif. wood dowel rods, sanded/grooved/otherwise advanced in condition, whether or not continuously shaped along edges or faces but not ends
其他非针叶树材。木质销钉，砂磨/凹槽/其他条件先进，无论是否沿边缘或面而不是端部连续成形 |
| 44092991 |
Other nonconiferous wood, whether or not continuously shaped along its edges or faces but not its ends
其他非针叶木，无论是否沿其边缘或面而不是其末端连续成形 |
| 44101100 |
Waferboard, including oriented strand board, of wood
木板的大片刨花板，包括定向的刨花板 |
| 44101200 |
Oriented strand board and waferboard, of wood, unworked or not further worked than sanded
定向刨花板和刨花板，木材，未加工或未进一步加工而不是打磨 |
| 44101900 |
Particle board and similar board of wood, other than waferboard
刨花板和类似的木板，除了刨花板 |
| 44109000 |
Particle board and similar board of ligneous materials other than wood
刨花板和木材以外的木质材料的类似板 |
| 44111210 |
MDF , <= 5mm thick, not mechanically worked or surface covered
MDF，厚度<= 5mm，未经机械加工或表面覆盖 |
| 44111220 |
MDF, <= 5mm thick, for construction, laminated
MDF，<= 5mm厚，用于建筑，层压 |
| 44111230 |
MDF , <= 5mm thick, for construction, not laminated,
MDF，<= 5mm厚，用于建筑，不层压， |
| 44111260 |
Fiberboard of a density over 0.5 g/cm3 but not over 0.8 g/cm3, not mechanically worked surface covered (Except for oil treatment)
纤维板密度超过0.5 g / cm3但不超过0.8 g / cm3，未经机械加工表面覆盖（除油处理外） |
| 44111290 |
MDF, <= 5mm thick, not for construction,
MDF，<= 5mm厚，不适合建筑， |
| 44111310 |
MDF, >5mm but <= 9 mm thick, not mechanically worked or surface covered
MDF，> 5mm但<= 9 mm厚，未经机械加工或表面覆盖 |
| 44111320 |
MDF, >5mm but <= 9 mm thick,, for construction, laminated
MDF，> 5mm但<= 9 mm厚，用于建筑，层压 |
| 44111330 |
MDF , >5mm but <= 9 mm thick, for construction, not laminated,
MDF，> 5mm但<= 9 mm厚，用于建筑，未层压， |
| 44111360 |
Fiberboard of a density over 0.5 g/cm3 but not over 0.8 g/cm3, not mechanically worked surface covered(except for oil treatment)
纤维板密度超过0.5 g / cm3但不超过0.8 g / cm3，未经机械加工表面覆盖（油处理除外） |
| 44111390 |
MDF, >5mm but <= 9 mm thick, not for construction,
MDF，> 5mm但<= 9 mm厚，不适用于建筑， |
| 44111410 |
Fiberboard of a thickness exceeding 9 mm, not mechanically worked or surface covered
纤维板厚度超过9毫米，未经机械加工或表面覆盖 |
| 44111420 |
Fiberboard of a thickness exceeding 9 mm, edgeworked continuously, laminated, for construction uses
纤维板厚度超过9毫米，边缘连续，层压，用于建筑用途 |
| 44111430 |
Fiberboard of a thickness exceeding 9 mm , tongued, grooved or rabbetted continuously, for construction uses,
厚度超过9毫米的纤维板，连续打舌，开槽或者连续，用于建筑用途， |
| 44111460 |
Fiberboard of a thickness exceeding 9 mm, not mechanically worked surface covered (except for oil treatment)
纤维板厚度超过9毫米，未经机械加工表面覆盖（除油处理外） |